DIY oven cabinet

Built-in oven - very convenient. This device is an independent "player" in the kitchen and can be installed where you cannot put a classic oven combined with a hob.

The oven set is a very important part of the modern kitchen. An oven, hob, as well as a storage box for accessories are integrated here. Such cabinets are indented for ventilation of the device, which distinguishes them from conventional cabinets.

Interesting fact! The first built-in ovens appeared more than half a century ago. Now these devices are the best-selling in the world, despite the prevalence of classic models of ovens.

Types of structures

There are several types of oven cabinets:

  1. Cases cases. In this type of construction, ovens are built in at eye level, and spacious cabinets for storing various kitchen utensils are installed below.
  2. Under the hob. Such devices are more similar to the classic version of ovens combined with stoves. They are less convenient than pencil cases, because when cooking you need to constantly lean over, which brings some discomfort. It may also cause problems with cleaning the oven. But in some situations they have advantages. For example, in small kitchens it will be difficult to put a large cupboard for the oven. Also, this design is suitable for those who concentrate all the items for cooking in one place.

Pros and cons of construction in a pencil case

Cases have a number of amenities: when cooking, you do not need to bend over, it is easier to follow the process of cooking. These headsets are useful for owners with back problems. Of course, their scope is much wider than just a place for the location of the oven. There you can install a slow cooker, toaster or other kitchen devices.

Since the ovens are up to par, it is important that the fixture is strong, because injuries can occur if the structure collapses.

How to make a cabinet under the oven with your own hands

To make such a headset yourself is not difficult. It is important to have basic knowledge and the necessary materials. Self-collection is cheaper, and the procedure itself usually takes about three hours. Creation takes place in several stages:

  • Sizes. Standard sizes of headsets: width - 60 centimeters, height - 85 centimeters. It is necessary to calculate the size of the headset in advance so that the width of the oven is 1-2 centimeters smaller;
  • Materials:
  1. Plywood, thickness - 18 mm;
  2. Worktop materials about 30 mm thick;
  3. Guides for a box;
  4. Furniture supports (ordinary, plastic);
  5. Euroscrews or confirmations, Self-tapping screws (3.5 by 16 mm);
  6. Screwdriver, tape measure, pencil, ruler;
  • The calculations. On the sidewalls, evenly draw the installation location of the drawer rails. It is important to consider the height of the drawer. Then drill holes for the upper horizon (the partitions where the oven will be placed). Make it down the line. Install the guides using self-tapping screws. The partition will stand above the box;

Drill 4 holes in the bottom, indentation on the right and left is -60 centimeters.

  •  Assembly. Count 5 centimeters from the edges to the middle, attach the legs. Put the bottom edge with the side parts attached (holes on the bottom specifically for this). Screw tight so that the screw head does not protrude beyond the plywood. Then we connect the partition by screwing the confimarts through the side holes.

Prepare the box by installing the mating parts of the guide.

We move on to the next part of the design - the installation of the hob. First, in the countertop, determine the center where the hob will be installed. To do this, additionally measure the outer part of the plate. After that, outline the dimensions of the future opening in which the inside of the panel will be installed. Measure the inside.

It is important to make drawings five millimeters larger for free entry of the structure. Then drill a hole in the line. It is important that it does not go out of line. After this, the jigsaw blade is inserted and an opening is cut.

Then you need to try to insert the hob into the opening. If necessary, carry out additional trimming. Then fix the device using the fasteners that come with the stove.

For ovens, good ventilation is essential for proper functioning. It is important to take care of this even before making the cabinet for the stove. For good ventilation, install the oven 60 mm from the wall of the headset, and the gaps on the side and bottom should be about 5 centimeters.

Some cabinets are designed with a special gap between the rear wall and the bottom for more productive ventilation. It is important to take care of this to prevent damage to the furniture, as well as damage to the oven itself. Carefully read the instructions for the oven before constructing the cabinet.

Findings

Ovens are a real miracle of technology. After built-in devices without a hob appeared in the world, people had the freedom to choose the location of this device. They are compact, they have more useful and interesting features that will help create culinary masterpieces.

Although for such ovens you need to purchase special kitchen sets, competently understanding this issue, we can not only acquire convenient and high-quality cabinets, but also create them with our own hands, having basic skill and the necessary materials.

Watch the video: How To Assemble An Oven Cabinet - DIY At Bunnings (March 2024).

Leave Your Comment